Belkin WiFi Extender Setup: Solve With Simple Tricks

Belkin is a well-renowned company that manufactures routers as well as the extenders. Generally, the router does not cover the entire home network. They provide WiFi signal up to the limited area. Occasionally router signals are interrupted because it is disturbed by the barriers near it, which weakens the signal. So, to overcome this interference and barriers, you need a device like Belkin WiFi Extender. If you do not know how to complete Belkin WiFi Extender Setup by yourself do not worry.

Belkin WiFi Extender Setup

Reasons Behind You Should Setup Belkin WiFi Extender

There are lots of reason for which you need Belkin Router Wifi Extender Setup. You can add a wired network as a wireless network to the computers. In addition, you can increase the coverage of your wireless networking. You can get push button by which you get the repeater mode. It also provides features like 64- and 128-bit WEP and WPA/WPA2 encryption.

Processes Of Belkin WiFi Extender Setup

It totally depends on WPS or Wi-Fi protected setup. It is the easiest way to set up an extender. It allows web-enabled clients connections without access to the Belkin routers’ configuration dashboard or network security key.

Method 1. By Increasing The Wireless Range Extender

  • At first, press or hold the WPS button for about 2 seconds on Belkin extender.
  • You will see that the WPS LED light starts to flicker. It indicates that WPS has been begun.
  • Now, you need to press the WPS button in 2 minutes that is located on the router. After that, start the WPS on your Belkin and after a while setup wireless extender.
  • Finally, you will see that configuration will start automatically.

Method 2. Belkin WiFi Extender Setup Via Belkin Setup Software

Initially, plug the device to a power supply to start the process. Always remember that the extender should be located within the limit of your router’s wireless network.

Then, identify & attach the Belkin setup network by your wifi allowed device. In this case, you are unable to see the network thus you need to reset the extender. Now, start a web browser and open “http://belkin.range” in the address bar and press Enter. Instead of typing the domain name you can also type the IP address that is to operate Belkin setup page.

In the next page, select on the Get started icon. There, you can choose a wireless network that you want to extend. After completing select the option Next.

If you can’t see the network then refresh your device by clicking on the refresh button for once. Now, wait some moments to connect the router to the network. Then, you need to verify the password of your Belkin setup. In case, you are using a dual-band network, then select the second wireless network. And finally, click on OK to proceed.

Related Blog:- How To Reset Belkin Modem To Its Factory Settings?

Dial Belkin Support Number +1-800-889-4715 for Instant Help

Belkin Support Number

In case if you find the above methods are not helpful for you then contact our Belkin Customer Support. There are lots of experienced engineers to solve the issue regarding Belkin WiFi extender setup. We are available for 24/7 so you can call us any time of the day without any doubt. You can also email us at our email ID. We will respond to you soon with the most effective solves.