All posts by Jose L. Knight


Belkin Router Won’t Turn On – Workable Solutions

Belkin in a famous brand in term of Routers. But chargers, SmartPhone other peripherals are the different products from the house as well. However, if you are facing this frightening issue of Belkin Router Won’t Turn On, then here is the solution. By studying this article, you will know the causes and the solutions for this problem.

Fix Belkin Router Won’t Turn On Issue: Professional Advice

Belkin router won’t turn on is an issue which occurs due to many factors but here are some of its solutions. Here we are discussing the ways which may be able to fix this issue.

First Step: Turn Off The Switches

As turning on is the initial step before using a router. However, after turning on the router if you face no lights issue then turn off the main power switch at which it is connected.

Second Step: Disconnect All The Wired Connections

After you turn off the power switch, then disconnect all the router wire connections very carefully. Try to detach all the cables without using any external strength. Because if you forcefully disconnect any wire connection, then it may worsen the condition, ending with a damaged wire.

Third Step: Place All The Wires Back To The Place

After the above process gets over then assemble the wires in its perfect areas. This is a time-consuming process as the user needs to check and then place the wires in its desired location.

Fourth Step: Switch On The Power Switch

Before turning on the power switch, again check that all the wires are in perfect place. After the investigation is over then turn on the current switch. And then check whether it works. And if not then it may relate to the hardware related issues.

Common Hardware Related Issues For Which Belkin Router Won’t Turn On

If after following the above procedures still, you are facing this annoying problem then this problem is due to Hardware issues. The causes can be as follows.

Wire Damage

If the power connecting wire gets damaged, then it can be the reason for which you are not able to use the Belkin Router device. In this case, at first, you need to check the router with another wire (it can be a new or from another device), but it needs to support the router. After that connect the router with this perfect condition wire and then by connecting with the power source if it works then you can rest. Otherwise, it may occur due to the below said reason.

Router Gets Damaged

If the above procedures do not work for you, then the cause is the major one, and that is the Belkin Router gets damaged. If this causing the problem, then you can do nothing about it without replacing with the new one. But before coming into a conclusion revise the above processes to check what is the condition of the router.

Related Blog:- How to Change Wi-Fi Password?

Belkin Router Support Number USA +1-800-889-4715 (Toll-Free):-

Belkin Support Number

Applying the instructions from this article, you will be able to resolve the Belkin Router won’t turn on Issue, on your own. If you are facing any issues like this with the Belkin Router, then you can make a call to us on our Belkin Router Customer Support. Our toll- free number is active round the clock. You can send your service queries to us via our official Belkin email address. And to get the instant reply you can also drop your query to our live chat portal. Our technical team is quite expert to provide you with the service


How to Setup Belkin Range Extender? A Step-by-Step Guide

Belkin is famous for its worldwide share of high performance and durability. Due to its brilliant performance from its product, it has emerged as one of the leading routers and extenders manufacturers. Belkin products never disappoint its users. Routers provide signals within a limited barrier that may weaken the signal. To overcome this issue users need a device like Belkin Range Extender. For this reason, they must know how to install the Belkin Range Extender Setup.

In case you are also eager to know the procedure then read the whole article and enhance your knowledge.

Belkin Range Extender Setup

Why You Should Setup Belkin Range Extender?

There are many purposes for which you need to set up the Belkin n300 range extender setup. You can add a wired network as a wireless network to the computer. In other words, you can enhance the coverage of your wireless networking. It gives features like 64- and 128-bit WEP and WPA / WPA2 encryption.

Processes Of Belkin Range Extender Setup

The process of setup the Belkin range extender is an easiest one. Go through the methods listed below.

Solution 1. Setup Belkin Range Extender Using WPS Key

To follow this step, at first, press or hold the WPS button for about 5 seconds on Belkin wifi range extender setup. You will notice that the WPS LED light starts to flicker. It symbolizes that WPS has begun. Now, press and hold down the WPS key that is settled on your Belkin router. After that, plug the Belkin range extender to a power terminal. Finally, use mobile or any computer for browsing the available network. From the list, choose Belkin setup.

Start Your Web browser and go to ‘http://Belkin.range.’ Now, tap on the option “Get Started” that is displayed on the Belkins setup Web page. After that, choose the name of your WiFi from the listing of available networks. Next, put your password of the  WiFi network when needed and choose the option Next. Then, pick the WiFi network one more time and tap on Next. Now, click on the option “Create Extended Network.” You may set up a new username and password for your range extender.

Method 2. Belkin Range Extender Setup Through Belkin Set Up Software

First, plug the machine to a power outlet for starting the process Belkin Range Extender Setup. Always keep in mind, that the extender should be located within the limit of your router’s wireless network.

Next, recognize & connect the setup belkin range extender by your wifi allowed device. Now, start a web browser and type “http://belkin.range” in the address bar and press Enter. Alternatively, you can also type the IP address that is to start Belkin wifi extender setup page. In the next page, choose on the “Get started” icon. There, you can select a wireless network that you require to extend. After finishing the process, select the option “Next”. If you can’t see the network then refresh your device by clicking on the refresh button for once. Now, wait for some time to connect the router to the network. Then, you need to verify the password of your Belkin setup. In case, you are using a dual-band network, then select the second wireless network. And at the final stage, click on OK to proceed.

Additional Tips To Remember

While you are working with Belkin range extender you should keep in mind some additional tips.

Check whether LED is flickering or not. If it does not flicker, then it means that your extension is not connected to wireless networks.

Check whether LED is fixed, in that case, the extender is connected to wireless networks but the signal is weak. It can give a slow performance.

Related Blog:- How To Update The Belkin Router Firmware?

Dial Belkin Router Support Number +1-800-889-4715 for Instant Help

Belkin Support Number

In case, if the discussed methods are not helpful for you, then you can dial our toll-free support number and give us a call. We have a team of experienced engineers who will solve your issue regarding Belkin Range Extender Setup. Our service is available for 24/7 so, you can call Belkin Router Support Number us at any time of the day. Our engineers work round the clock. You can also email us at our email Id without any hesitation. The professionals are always there to serve you with the best solutions.


Belkin WiFi Extender Setup: Solve With Simple Tricks

Belkin is a well-renowned company that manufactures routers as well as the extenders. Generally, the router does not cover the entire home network. They provide WiFi signal up to the limited area. Occasionally router signals are interrupted because it is disturbed by the barriers near it, which weakens the signal. So, to overcome this interference and barriers, you need a device like Belkin WiFi Extender. If you do not know how to complete Belkin WiFi Extender Setup by yourself do not worry.

Belkin WiFi Extender Setup

Reasons Behind You Should Setup Belkin WiFi Extender

There are lots of reason for which you need Belkin Router Wifi Extender Setup. You can add a wired network as a wireless network to the computers. In addition, you can increase the coverage of your wireless networking. You can get push button by which you get the repeater mode. It also provides features like 64- and 128-bit WEP and WPA/WPA2 encryption.

Processes Of Belkin WiFi Extender Setup

It totally depends on WPS or Wi-Fi protected setup. It is the easiest way to set up an extender. It allows web-enabled clients connections without access to the Belkin routers’ configuration dashboard or network security key.

Method 1. By Increasing The Wireless Range Extender

  • At first, press or hold the WPS button for about 2 seconds on Belkin extender.
  • You will see that the WPS LED light starts to flicker. It indicates that WPS has been begun.
  • Now, you need to press the WPS button in 2 minutes that is located on the router. After that, start the WPS on your Belkin and after a while setup wireless extender.
  • Finally, you will see that configuration will start automatically.

Method 2. Belkin WiFi Extender Setup Via Belkin Setup Software

Initially, plug the device to a power supply to start the process. Always remember that the extender should be located within the limit of your router’s wireless network.

Then, identify & attach the Belkin setup network by your wifi allowed device. In this case, you are unable to see the network thus you need to reset the extender. Now, start a web browser and open “http://belkin.range” in the address bar and press Enter. Instead of typing the domain name you can also type the IP address that is to operate Belkin setup page.

In the next page, select on the Get started icon. There, you can choose a wireless network that you want to extend. After completing select the option Next.

If you can’t see the network then refresh your device by clicking on the refresh button for once. Now, wait some moments to connect the router to the network. Then, you need to verify the password of your Belkin setup. In case, you are using a dual-band network, then select the second wireless network. And finally, click on OK to proceed.

Related Blog:- How To Reset Belkin Modem To Its Factory Settings?

Dial Belkin Support Number +1-800-889-4715 for Instant Help

Belkin Support Number

In case if you find the above methods are not helpful for you then contact our Belkin Customer Support. There are lots of experienced engineers to solve the issue regarding Belkin WiFi extender setup. We are available for 24/7 so you can call us any time of the day without any doubt. You can also email us at our email ID. We will respond to you soon with the most effective solves.


How To Set Password On Belkin Router | Quick Hacks To Resolve

Belkin is an electronic device manufacturing company. Power banks, earphones, chargers, and routers are the commonly used products of Belkin. However, to keep your Belkin router secure, you need to set a password. Go through this article to learn How to Set Password on Belkin Router?.

Why Set Password On Belkin Router

There are several reasons for which you need to set a password on your Belkin router. You may want to save your data and ensure complete privacy. If you disclose your router password to anyone, they can misuse it. To protect your data from others, you need to set a password to the Belkin router.

Always keep on changing your Belkin router password to protect your data. Many of the hacking software is also available on the internet to know the password of your router. So by altering the password, you can resolve this data losing issue.

How To Set Password On Belkin Router

By following the below procedures, you will be able to get an idea regarding how to set a password on a Belkin router.

  • Before beginning the procedures of setting a new password in your Belkin router make sure you have a good internet connection setup.
  • At first, you need to open a preferred browser (Safari, Google, Microsoft Edge are the commonly used browsers) in your system.
  • In the address bar type and then hit on the Enter button.
  • Now you will see the setup page of a Belkin Router and then click on the Utility option.
  • Under Utilities, select System Settings option and enter the current password of your Belkin router if have one, otherwise, leave the current password blank.
  • Then at the new password space, set-up your preferable password and re-enter the same on the confirmation Password space.
  • After that click on ‘Apply Changes’.

This will change the password of your Belkin router. Confirm it by entering the new password in your system to check if it works. If not, then you can reset your Belkin Router to change the password.

Reset Belkin Router

By following the above procedures if you are not able to solve your queries regarding how to set a password on Belkin router, then you need to reset your Belkin router. Try the steps below to reset your Belkin router.

  1. At first, you need to turn on the router and then locate the reset button of your router
  2. Press and hold the Reset button with the help of a needle-like pin for 10 seconds.
  3. After that, the router will automatically reboot.
  4. Now follow the procedures regarding how to set a password on Belkin router in order to set a new password.

This is the most effective way to set the password in your Belkin router.

Related Blog:-How To Perform Belkin Router Firmware Update?

Dial-up our Belkin Support Number +1-800-889-4715  for Further Assistance

Belkin Support Number

Our technical members believe in providing you with the best possible solutions and affordable Belkin Support for your Belkin router problems. By studying this article, you will be able to learn Set a Password on Belkin Router. If you have any problem to understand the procedures to set a password to your router, you can directly dial Belkin Customer Care Number. You can also chat live with the experts to clear your queries about Belkin router problems. Send a message at the official email address to get the answer to your questions in an instant.


Get Best Help If Your Belkin Router Not Working

Belkin Routers have always been a well-known router manufacturing company when it comes to providing better services than the other companies. It offers a great user-friendly interface that makes it more reliable. Despite its brilliant features, users often face issues like Belkin Router not working.

To fix the glitches quickly, you need to follow the steps which are quite easy and yet effective. Therefore, go through the article to fix the error instantly.

Reasons Responsible For Belkin Router Not Working

There are several reasons that may result in the Belkin router performance failure. Therefore, it is necessary to find out the exact reason behind the error before we move on to the solutions.

You can face a sudden glitch of the router in the middle of its work. This problem can arise due to Overheating or router firmware. Similarly, hardware and ISP issues can also harm your router in several ways.

Whatever it may be, it can create more troubles for your router if you don’t take the right initiative to resolve it. Keeping that in mind, you can go through the section below and get some effective fixes for the problem.

Easy Steps To Repair When Belkin Router Not Working

Follow the easy steps to fix the issue quickly.

Basic Troubleshooting

  • At first, remove the power link and wait for 30 seconds and plug in the cable again.
  • Then, reboot the modem.
  • Next, reboot the router and your computer and wait for a few minutes.
  • Finally, check your Belkin router if it is reflecting the online status.

Fix Belkin Router

  • To follow the step at first, you need to unplug the router from the modem.
  • Now, connect your device to your modem with a cable link and check if you are getting the internet connection.
  • Then, connect the modem to the router by using an internet cable in the internet port.
  • Next, go to the URL box and type in it. You can see that the router’s setup page will open.
  • Now set up your router and change the password.

Reset The Belkin Router

Resetting your Belkin router can solve the issue as well.

  • First of all, find the Reset key of the router which is located at the bottom or back of the router.
  • Then, hold down the Reset key with the help of your hand or a pen for 30 seconds.
  • Now, reboot your router and check if the error persists.
  • If it starts working then update your router firmware.

Check WiFi Security Settings

If you are using a wireless router then this step might help you. If you are using a wired router then ignore this particular step.

  • At first, click on the Wireless option and then Encryption.
  • Then, look at the Security Mode drop-down menu.
  • If you find the option is selected as Disabled, make it enable.
  • Next, choose one of the menu “64bit WEP,” “128bit WEP,” “WEP/PA2-Personal,” “WPA PSK” or the “WEP” or “WPA” mode.
  • Next, choose the Wireless option in the taskbar. Then, tap on Connect. And check if still the Belkin router not working.

Additional Tips To Remember

  • Try contacting your internet service provider without failing all the steps to set up your router.
  • Make sure and be very careful while resetting. Don’t reset the internet modem instead of your router. Most of the people do this blunder while resetting.
Related Blog: Top Most Ways To Fix Belkin Router IP Address Not Working

Contact Us at +1-800-889-4715 For Further Assistance Related to Belkin Router:


If you don’t find any workable solution to get rid of Belkin Router Not Working, then just give us a call and let our Belkin Router Support know your required queries. Our engineers are experienced enough to ensure you a better performance of your router with effective solutions. Our customer service is open 24*7. So you can reach us any time and get an immediate assistance from our end. You can also email us at our email ID. The experts will respond you as quick as possible.


Get Belkin Router Setup Instruction In 5 Minutes

Belkin is one of the most established brands of routers available nowadays. With its top-notch characteristic, it allows various configurations within the system. It supports both wireless and wired networks. But users do face a lot of issues while Belkin Router Setup. Are you also looking to know how To set up Belkin router?

Go through this article and get the best-in-class guidance to set up the Belkin router. If even after going through the guide you are unable to set up the router then contact us for expert guidance.

Tips About How To Set Up Belkin Router

The most crucial requirement about the Belkin router is the Internet connectivity. If the internet connectivity has difficulty, then it would be quite impossible to reset the system. Check the DHCP of the router and ensure it is enabled. Also, set the static IP and the Default gateway of the network.

Find if there are any missing files which might create any configuration errors. Use a valid username and password along with the gateway.

Easy Ways On How To Set Up Belkin Router

To set up the router first, navigate to the “Utilities” option and select the “Restore Factory Default” link. The link will generate information about the various configuration, the reset procedures require.

Select the “Restore Defaults” option and check the pop-up message on the web page. Select OK in the confirmation box and set the router for an auto reset. Once the device resets itself, then restart the computer.

Connectivity with the Modem

First of all, restart the computer. Plug in the router into the power and check the Ethernet wire connections. After that check the WAN port and attach it with the yellow section of the router. Once done with the process restart the system correctly.

Set the router using a phone

Open your phone and go to the Settings. Select the wireless network list there and connect with it. Type in the default IP and press Enter. In the Wireless config option reset the password and confirm security. Provide a specific name to the router and save the settings.

Connect the Ethernet cable to the device and enter the provided IP in the address box and press enter. Make sure you complete this process as the admin. Save the settings and select the wireless network. Disable SSID and continue with the process. Recheck the connectivity with the Wireless security option and enter the password in the WEP.

Related Blog: Top Most Ways To Fix Belkin Router IP Address Not Working

Contact Us at +1-800-889-4715 For Further Assistance Related to Belkin Router:


After following all these resolution, if you are still struggling to reset your router, then it is better to get expert assistance. Do not worry; we are here to help you with any issues related to Belkin routers. We have the best panel of Belkin Router Support who have years of experience in this relative error.

We are available 24X7 to help you out. You can reach out to us by either calling out experts at our service helpdesk toll-free number +1-800-889-4715. You can also contact us via email or the live chat facility that we provide and share all your queries.


Top Most Ways To Fix Belkin Router IP Address Not Working

When you set up the Belkin router in your home network, it permits other devices including PC, laptop, and smartphones to access the common internet connection with high-speed data. But, you can come across this problem of Belkin router IP address not working issue. So, don’t panic and check out this article to know about Belkin IP error. It will also help you to learn a few quick steps to resolve this IP not working problem. If you need certified technicians to solve this Belkin router error, consult our team to avail technical solution.

Belkin router ip address not working

Why You Face Belkin Router IP Address Not Working Issue?

If you are quite confused that why the Belkin router IP address not working in your device, check out the underlying issues that can cause this problem. So, let’s discuss a few scenarios when you can get this Belkin IP error.

  • You are running Windows XP and recently started using Belkin ADSL modem. Earlier this IP address error was not there while using an older broadband device. Since there can be compatibility issues with XP OS and router setup files, you can experience this issue.
  • Many users are still using Internet Explorer older versions for accessing the internet, say IE6 and below. So, if you are one of them, the configuration setup page may not open for router settings. Hence, you can get this Belkin IP error as the address bar fails to open link.
  • When you have got an anti-spam filter or various security products running in your PC, you can face this issue. If your device has Firewall or anti-malware software, this error can cause any time. The reason is due to program conflict between security software and Ethernet settings.
  • If the Belkin modem is corrupt due to pseudo-interface issue with tunnel adapter, it can generate this problem. Also, you might notice that the ‘ipconfig/all’ output is not generating following this router error.
  • One major cause why you can face this router issue is due to technical fault in destination host. Hence, the problem can be with the host IP and not the Belkin router to cause this error.

How Can You Fix IP Address Issues With Belkin Router Support?

You can fix IP address errors by following these Belkin router support instructions:

  • Make sure that the connecting cable between modem, router and your device is error-free. You have to ensure that modem is connected from WAN port of the Belkin router.
  • Hard reset your router device so as to detect internet signals from the modem.
  • In case, if the router fails to fix the IP address issue, you have to apply the latest firmware update. This will resolve the error and help the router to make the address changes.
  • You can also copy the mac address by mac cloning technique to fix this router problem.
  • If everything fails to resolve IP issues in Belkin, the router can be faulty instead. So, replace it with a new router or repair it with experienced technicians.

Related Blog: How To Perform Belkin Router Firmware Update?

Why Contact Belkin Router Support Number To Resolve IP Address Errors?

Belkin Customer Support number

To know more causes on why Belkin router IP address not working, consult our networking experts at Belkin Router Support Number. Also, if you can’t follow the above steps to troubleshoot Belkin IP error, our professionals can help to fix it. We have highly talented networking specialists who have vast knowledge on Belkin routers. Hence, fixing your IP address issues is quite easy for our Belkin Router Support Number technicians.

Dial For Solution

Give us a call at Belkin Router Support Number +1-800-889-4715 helpline to discuss router issues in details.

Chat For Solution

You can initiate a discussion with our technical experts at Live Chat Portal to resolve Belkin router errors.

Email For Solution

Send us your router problems at our Belkin Router Support Number email address to get a quick response from networking professionals.


How To Fix Belkin Range Extender Setup F9K1106v1 Problem?

Global customers work with the extenders to extend network range and fix any kind of Wi-Fi connectivity issue. Here, we will see how to Fix Belkin Range Extender Setup F9K1106v1 Problem in few easy steps. We bring you simple steps to put in place the extender and start working with it. Below steps are quite easy to apply even if you are a beginner. But, one should install a browser into it and must have a network SSID as well as Password.

Steps to Fix Belkin Range Extender Setup F9K1106v1 Problem:

Fix Belkin Range Extender Setup F9K1106v1 Problem

Step 1: According to the Belkin Router Support expert technicians, connect the cable to the Ethernet port and plug it into the power supply. The next thing is to visit the Belkin official page to follow all instructions. This will help you install the extender.

Step 2: Now, users need to connect the range extender via a wireless network. After this step is compete, disconnect from the PC and unplug its power supply.

Step 3: Place your extender where easy access of the network is available. This will ensure that network issues will stay away. Remember not to install the extender in the area where you wish to establish the extended network. Plug into the power supply.

Related blog: How To Fix Belkin Router Internet Connection Issue?

If still you are unable to fix the issue, connect at below contact details!

Belkin Router Technical Support Number

If you face any issues while installing the extender, call our Belkin Router Support Number +1-800-889-4715 technicians as they are available 24/7 hours to guide customers as and when in need. We resolve every network issue from the core so that they never arise in near future. Save hours of searching online tech support solutions and reach us to fix related problems by applying tailor-made remedies!


How To Perform Belkin Router Firmware Update?

The firmware update of a Belkin router is an essential process as it guarantees to work with a program which includes a set of instructions. These are encoded in the device. Here we will see how to perform Belkin router firmware update with appropriate instructions. Well, an update of Belkin routers plays a major role in enabling a device to work as per users’ need. Not only this but also, one should know the importance of when to update the Belkin router firmware update process.

Well, the most suitable time is when the device will come across unusual signals. This will notify users to update the system via some indications. While one should keep this in mind that updating Belkin Router can consume a huge amount of time. This can happen users are not aware of the actual updating process. If any of the steps will go wrong then, the entire process will disrupt. Thus, it is always good to approach for a professional guideline.

Steps to perform Belkin router firmware update are:

Perform Belkin Router Firmware Update

  • Do ensure that the there is a proper connection to your Belkin Wireless Router. To do this, make use of cables.
  • Now, plug in your router to power outlet and open up the “setup Page”
  • As per as Belkin router support team instructions, enter the default IP Address to login with the router. Do not type anything in password section.
  • If in case your Belkin router login details are inaccurate, reset the router settings.
  • Now, here there will be an automatic notification of a new Belkin router version. Also, a message may appear as a “Firmware Update Available”.
  • Install your router device now
Related Blog : How To Fix Belkin Router 502 Bad Gateway Error?
So, why there is a need to update Belkin router firmware: Here are top reasons:

Well, it is quite essential for us to perform Belkin router firmware update. It will eradicate all types of bugs while you are in update process. This update process will rectify any issues related to corrupted files. Also, the process will remove any type of malware if it was there in the previous version. Thus, will make your system clean. Also, if users are working with an updated version, it will add all the latest functionalities needed for work.

The next thing what come as an important part is that not to forget to choose the Belkin router firmware update. This should be in accordance to the device model number as well as specifications. This is to ensure that the device is compatible. Now make a selection of all the displayed update options and work with most of them.

Connect with our technical experts for instant remedies at your desk!

Belkin Customer Support number

We work 24/7 hours at Dial +1-800-889-4715 Belkin router support number to bring effective solutions with satisfactory results. Our team of technical experts studies every issue from the core to deliver appropriate solutions for Belkin router problems. Come and explore our solutions in just a call away.


How To Reset Belkin Modem To Its Factory Settings?

Belkin modem has a wide number of features with infinite benefits to work with this device via which users can have an easy access to internet. Here we will teach you Reset Belkin Modem to Its Factory Settings in easy steps. Users can configure these routers no matter whatever operating systems they are working on. The Belkin modem allow users to have an instant access to internet and takes care of all troubles that it has while one is using their  set-up mode on the device.  So, if you are searching for the professional approach to do modem factory reset steps, follow instructions below.

Steps to Reset Belkin Modem to Its Factory Settings are:

Reset Belkin Modem To Its Factory Settings

Steps here will show you two sections to go ahead with the process. Here are they:

Part 1: Reset Belkin Modem
  • Go to the Belkin router section which will appear on your screen and click “Reset” button. The button will appear on the router’s back section and is visible by its name.
  • Now, reset the router push button to click “Reset” icon and release the button. The light of your router will here flash for a while and “Power/Ready” icon will appear on the screen. Users need to change it from solid to blink mode. After the light will become in steady mode, the reset process is complete by then.
  • Next is to push the ‘Reset’ button and hold it for few more seconds so that users can start the ‘Restore to Factory Defaults’ process. This will “Reset Belkin Modem to Its Factory Settings”.
  • Release the button and your router’s light will start to flash. The router is now reset to factory default settings.  This will happen after the light has stop its blinking process.
Part 2: Steps to reset Belkin modem via user interface:
  • Open up the browser on your system and navigate to appropriate IP address of user interface.
  • As per as Belkin Router Support technicians, tap ‘Login’ icon and type appropriate password in the field. Click ‘Submit’ button and move to the next step
  • Open up “Utilities window” and click on ‘Utilities’ tab.
  • You will come across a list of options where users need to select ‘Restart Router’ button.
  • If you wish to restart the router then, tap ‘OK’ button and again click ‘OK’ icon. The router here will restart and user interface will reappear on its own after you are done with the reset mode.
  • Select the ‘Restore Factory Defaults’ icon from the ‘Utilities window’ icon
  • Now click on ‘Restore Defaults’ button and then click ‘OK’.
  • Start with the reset mode and this is possible when users will click ‘OK’ button. Here, user interface will reappear on the screen.
Related Blog: How To Configure Belkin Wireless Router As An Internet Gateway?

If you need instant help to reset Belkin modem to factory settings, approach our technical experts!

Belkin Router Technical Support Number

If you are still finding answers on ways to reset Belkin modem to factory settings, here is our expert assistance available at +1-800-889-4715 Belkin Router Support Number 24/7 hours at your desk. Our support professionals are always available to assist customers resolve any related matter of Belkin routers.  Place call at us to eradicate all sorts of problems that arise in Belkin routers.