All posts by admin


Get Best Help If Your Belkin Router Not Working

Belkin Routers have always been a well-known router manufacturing company when it comes to providing better services than the other companies. It offers a great user-friendly interface that makes it more reliable. Despite its brilliant features, users often face issues like Belkin Router not working.

To fix the glitches quickly, you need to follow the steps which are quite easy and yet effective. Therefore, go through the article to fix the error instantly.

Reasons Responsible For Belkin Router Not Working

There are several reasons that may result in the Belkin router performance failure. Therefore, it is necessary to find out the exact reason behind the error before we move on to the solutions.

You can face a sudden glitch of the router in the middle of its work. This problem can arise due to Overheating or router firmware. Similarly, hardware and ISP issues can also harm your router in several ways.

Whatever it may be, it can create more troubles for your router if you don’t take the right initiative to resolve it. Keeping that in mind, you can go through the section below and get some effective fixes for the problem.

Easy Steps To Repair When Belkin Router Not Working

Follow the easy steps to fix the issue quickly.

Basic Troubleshooting

  • At first, remove the power link and wait for 30 seconds and plug in the cable again.
  • Then, reboot the modem.
  • Next, reboot the router and your computer and wait for a few minutes.
  • Finally, check your Belkin router if it is reflecting the online status.

Fix Belkin Router

  • To follow the step at first, you need to unplug the router from the modem.
  • Now, connect your device to your modem with a cable link and check if you are getting the internet connection.
  • Then, connect the modem to the router by using an internet cable in the internet port.
  • Next, go to the URL box and type in it. You can see that the router’s setup page will open.
  • Now set up your router and change the password.

Reset The Belkin Router

Resetting your Belkin router can solve the issue as well.

  • First of all, find the Reset key of the router which is located at the bottom or back of the router.
  • Then, hold down the Reset key with the help of your hand or a pen for 30 seconds.
  • Now, reboot your router and check if the error persists.
  • If it starts working then update your router firmware.

Check WiFi Security Settings

If you are using a wireless router then this step might help you. If you are using a wired router then ignore this particular step.

  • At first, click on the Wireless option and then Encryption.
  • Then, look at the Security Mode drop-down menu.
  • If you find the option is selected as Disabled, make it enable.
  • Next, choose one of the menu “64bit WEP,” “128bit WEP,” “WEP/PA2-Personal,” “WPA PSK” or the “WEP” or “WPA” mode.
  • Next, choose the Wireless option in the taskbar. Then, tap on Connect. And check if still the Belkin router not working.

Additional Tips To Remember

  • Try contacting your internet service provider without failing all the steps to set up your router.
  • Make sure and be very careful while resetting. Don’t reset the internet modem instead of your router. Most of the people do this blunder while resetting.
Related Blog: Top Most Ways To Fix Belkin Router IP Address Not Working

Contact Us at +1-800-889-4715 For Further Assistance Related to Belkin Router:


If you don’t find any workable solution to get rid of Belkin Router Not Working, then just give us a call and let our Belkin Router Support know your required queries. Our engineers are experienced enough to ensure you a better performance of your router with effective solutions. Our customer service is open 24*7. So you can reach us any time and get an immediate assistance from our end. You can also email us at our email ID. The experts will respond you as quick as possible.


Get Belkin Router Setup Instruction In 5 Minutes

Belkin is one of the most established brands of routers available nowadays. With its top-notch characteristic, it allows various configurations within the system. It supports both wireless and wired networks. But users do face a lot of issues while Belkin Router Setup. Are you also looking to know how To set up Belkin router?

Go through this article and get the best-in-class guidance to set up the Belkin router. If even after going through the guide you are unable to set up the router then contact us for expert guidance.

Tips About How To Set Up Belkin Router

The most crucial requirement about the Belkin router is the Internet connectivity. If the internet connectivity has difficulty, then it would be quite impossible to reset the system. Check the DHCP of the router and ensure it is enabled. Also, set the static IP and the Default gateway of the network.

Find if there are any missing files which might create any configuration errors. Use a valid username and password along with the gateway.

Easy Ways On How To Set Up Belkin Router

To set up the router first, navigate to the “Utilities” option and select the “Restore Factory Default” link. The link will generate information about the various configuration, the reset procedures require.

Select the “Restore Defaults” option and check the pop-up message on the web page. Select OK in the confirmation box and set the router for an auto reset. Once the device resets itself, then restart the computer.

Connectivity with the Modem

First of all, restart the computer. Plug in the router into the power and check the Ethernet wire connections. After that check the WAN port and attach it with the yellow section of the router. Once done with the process restart the system correctly.

Set the router using a phone

Open your phone and go to the Settings. Select the wireless network list there and connect with it. Type in the default IP and press Enter. In the Wireless config option reset the password and confirm security. Provide a specific name to the router and save the settings.

Connect the Ethernet cable to the device and enter the provided IP in the address box and press enter. Make sure you complete this process as the admin. Save the settings and select the wireless network. Disable SSID and continue with the process. Recheck the connectivity with the Wireless security option and enter the password in the WEP.

Related Blog: Top Most Ways To Fix Belkin Router IP Address Not Working

Contact Us at +1-800-889-4715 For Further Assistance Related to Belkin Router:


After following all these resolution, if you are still struggling to reset your router, then it is better to get expert assistance. Do not worry; we are here to help you with any issues related to Belkin routers. We have the best panel of Belkin Router Support who have years of experience in this relative error.

We are available 24X7 to help you out. You can reach out to us by either calling out experts at our service helpdesk toll-free number +1-800-889-4715. You can also contact us via email or the live chat facility that we provide and share all your queries.


Top Most Ways To Fix Belkin Router IP Address Not Working

When you set up the Belkin router in your home network, it permits other devices including PC, laptop, and smartphones to access the common internet connection with high-speed data. But, you can come across this problem of Belkin router IP address not working issue. So, don’t panic and check out this article to know about Belkin IP error. It will also help you to learn a few quick steps to resolve this IP not working problem. If you need certified technicians to solve this Belkin router error, consult our team to avail technical solution.

Belkin router ip address not working

Why You Face Belkin Router IP Address Not Working Issue?

If you are quite confused that why the Belkin router IP address not working in your device, check out the underlying issues that can cause this problem. So, let’s discuss a few scenarios when you can get this Belkin IP error.

  • You are running Windows XP and recently started using Belkin ADSL modem. Earlier this IP address error was not there while using an older broadband device. Since there can be compatibility issues with XP OS and router setup files, you can experience this issue.
  • Many users are still using Internet Explorer older versions for accessing the internet, say IE6 and below. So, if you are one of them, the configuration setup page may not open for router settings. Hence, you can get this Belkin IP error as the address bar fails to open link.
  • When you have got an anti-spam filter or various security products running in your PC, you can face this issue. If your device has Firewall or anti-malware software, this error can cause any time. The reason is due to program conflict between security software and Ethernet settings.
  • If the Belkin modem is corrupt due to pseudo-interface issue with tunnel adapter, it can generate this problem. Also, you might notice that the ‘ipconfig/all’ output is not generating following this router error.
  • One major cause why you can face this router issue is due to technical fault in destination host. Hence, the problem can be with the host IP and not the Belkin router to cause this error.

How Can You Fix IP Address Issues With Belkin Router Support?

You can fix IP address errors by following these Belkin router support instructions:

  • Make sure that the connecting cable between modem, router and your device is error-free. You have to ensure that modem is connected from WAN port of the Belkin router.
  • Hard reset your router device so as to detect internet signals from the modem.
  • In case, if the router fails to fix the IP address issue, you have to apply the latest firmware update. This will resolve the error and help the router to make the address changes.
  • You can also copy the mac address by mac cloning technique to fix this router problem.
  • If everything fails to resolve IP issues in Belkin, the router can be faulty instead. So, replace it with a new router or repair it with experienced technicians.

Related Blog: How To Perform Belkin Router Firmware Update?

Why Contact Belkin Router Support Number To Resolve IP Address Errors?

Belkin Customer Support number

To know more causes on why Belkin router IP address not working, consult our networking experts at Belkin Router Support Number. Also, if you can’t follow the above steps to troubleshoot Belkin IP error, our professionals can help to fix it. We have highly talented networking specialists who have vast knowledge on Belkin routers. Hence, fixing your IP address issues is quite easy for our Belkin Router Support Number technicians.

Dial For Solution

Give us a call at Belkin Router Support Number +1-800-889-4715 helpline to discuss router issues in details.

Chat For Solution

You can initiate a discussion with our technical experts at Live Chat Portal to resolve Belkin router errors.

Email For Solution

Send us your router problems at our Belkin Router Support Number email address to get a quick response from networking professionals.


How To Fix Belkin Range Extender Setup F9K1106v1 Problem?

Global customers work with the extenders to extend network range and fix any kind of Wi-Fi connectivity issue. Here, we will see how to Fix Belkin Range Extender Setup F9K1106v1 Problem in few easy steps. We bring you simple steps to put in place the extender and start working with it. Below steps are quite easy to apply even if you are a beginner. But, one should install a browser into it and must have a network SSID as well as Password.

Steps to Fix Belkin Range Extender Setup F9K1106v1 Problem:

Fix Belkin Range Extender Setup F9K1106v1 Problem

Step 1: According to the Belkin Router Support expert technicians, connect the cable to the Ethernet port and plug it into the power supply. The next thing is to visit the Belkin official page to follow all instructions. This will help you install the extender.

Step 2: Now, users need to connect the range extender via a wireless network. After this step is compete, disconnect from the PC and unplug its power supply.

Step 3: Place your extender where easy access of the network is available. This will ensure that network issues will stay away. Remember not to install the extender in the area where you wish to establish the extended network. Plug into the power supply.

Related blog: How To Fix Belkin Router Internet Connection Issue?

If still you are unable to fix the issue, connect at below contact details!

Belkin Router Technical Support Number

If you face any issues while installing the extender, call our Belkin Router Support Number +1-800-889-4715 technicians as they are available 24/7 hours to guide customers as and when in need. We resolve every network issue from the core so that they never arise in near future. Save hours of searching online tech support solutions and reach us to fix related problems by applying tailor-made remedies!


How To Perform Belkin Router Firmware Update?

The firmware update of a Belkin router is an essential process as it guarantees to work with a program which includes a set of instructions. These are encoded in the device. Here we will see how to perform Belkin router firmware update with appropriate instructions. Well, an update of Belkin routers plays a major role in enabling a device to work as per users’ need. Not only this but also, one should know the importance of when to update the Belkin router firmware update process.

Well, the most suitable time is when the device will come across unusual signals. This will notify users to update the system via some indications. While one should keep this in mind that updating Belkin Router can consume a huge amount of time. This can happen users are not aware of the actual updating process. If any of the steps will go wrong then, the entire process will disrupt. Thus, it is always good to approach for a professional guideline.

Steps to perform Belkin router firmware update are:

Perform Belkin Router Firmware Update

  • Do ensure that the there is a proper connection to your Belkin Wireless Router. To do this, make use of cables.
  • Now, plug in your router to power outlet and open up the “setup Page”
  • As per as Belkin router support team instructions, enter the default IP Address to login with the router. Do not type anything in password section.
  • If in case your Belkin router login details are inaccurate, reset the router settings.
  • Now, here there will be an automatic notification of a new Belkin router version. Also, a message may appear as a “Firmware Update Available”.
  • Install your router device now
Related Blog : How To Fix Belkin Router 502 Bad Gateway Error?
So, why there is a need to update Belkin router firmware: Here are top reasons:

Well, it is quite essential for us to perform Belkin router firmware update. It will eradicate all types of bugs while you are in update process. This update process will rectify any issues related to corrupted files. Also, the process will remove any type of malware if it was there in the previous version. Thus, will make your system clean. Also, if users are working with an updated version, it will add all the latest functionalities needed for work.

The next thing what come as an important part is that not to forget to choose the Belkin router firmware update. This should be in accordance to the device model number as well as specifications. This is to ensure that the device is compatible. Now make a selection of all the displayed update options and work with most of them.

Connect with our technical experts for instant remedies at your desk!

Belkin Customer Support number

We work 24/7 hours at Dial +1-800-889-4715 Belkin router support number to bring effective solutions with satisfactory results. Our team of technical experts studies every issue from the core to deliver appropriate solutions for Belkin router problems. Come and explore our solutions in just a call away.


How To Reset Belkin Modem To Its Factory Settings?

Belkin modem has a wide number of features with infinite benefits to work with this device via which users can have an easy access to internet. Here we will teach you Reset Belkin Modem to Its Factory Settings in easy steps. Users can configure these routers no matter whatever operating systems they are working on. The Belkin modem allow users to have an instant access to internet and takes care of all troubles that it has while one is using their  set-up mode on the device.  So, if you are searching for the professional approach to do modem factory reset steps, follow instructions below.

Steps to Reset Belkin Modem to Its Factory Settings are:

Reset Belkin Modem To Its Factory Settings

Steps here will show you two sections to go ahead with the process. Here are they:

Part 1: Reset Belkin Modem
  • Go to the Belkin router section which will appear on your screen and click “Reset” button. The button will appear on the router’s back section and is visible by its name.
  • Now, reset the router push button to click “Reset” icon and release the button. The light of your router will here flash for a while and “Power/Ready” icon will appear on the screen. Users need to change it from solid to blink mode. After the light will become in steady mode, the reset process is complete by then.
  • Next is to push the ‘Reset’ button and hold it for few more seconds so that users can start the ‘Restore to Factory Defaults’ process. This will “Reset Belkin Modem to Its Factory Settings”.
  • Release the button and your router’s light will start to flash. The router is now reset to factory default settings.  This will happen after the light has stop its blinking process.
Part 2: Steps to reset Belkin modem via user interface:
  • Open up the browser on your system and navigate to appropriate IP address of user interface.
  • As per as Belkin Router Support technicians, tap ‘Login’ icon and type appropriate password in the field. Click ‘Submit’ button and move to the next step
  • Open up “Utilities window” and click on ‘Utilities’ tab.
  • You will come across a list of options where users need to select ‘Restart Router’ button.
  • If you wish to restart the router then, tap ‘OK’ button and again click ‘OK’ icon. The router here will restart and user interface will reappear on its own after you are done with the reset mode.
  • Select the ‘Restore Factory Defaults’ icon from the ‘Utilities window’ icon
  • Now click on ‘Restore Defaults’ button and then click ‘OK’.
  • Start with the reset mode and this is possible when users will click ‘OK’ button. Here, user interface will reappear on the screen.
Related Blog: How To Configure Belkin Wireless Router As An Internet Gateway?

If you need instant help to reset Belkin modem to factory settings, approach our technical experts!

Belkin Router Technical Support Number

If you are still finding answers on ways to reset Belkin modem to factory settings, here is our expert assistance available at +1-800-889-4715 Belkin Router Support Number 24/7 hours at your desk. Our support professionals are always available to assist customers resolve any related matter of Belkin routers.  Place call at us to eradicate all sorts of problems that arise in Belkin routers.

belkin router

How To Configure Belkin Wireless Router As An Internet Gateway?

This is basically for home and for your office.  Before we go further and tell you the steps to configure Belkin wireless router as an internet gateway, these are based on an old version of Belkin “Wireless G router”. But in current trend, there are lots of new versions available in the market.

Steps to configure Belkin wireless router as an internet gateway are

Configure Belkin Wireless Router As An Internet Gateway

Step 1: The first step to configure Belkin wireless router as an internet gateway is to access UTP Ethernet cable and plug into the router to its power. Now, connect the Ethernet cable in any of the given 4 LAN ports which is there on the wireless router.

Step 2: Now, type IP Address “” into the web-browser and press Enter.

Click “Login button” which is there on the Right Hand Side and is on the open Belkin page. Now, return to its detailed page which will show you a logout button.

Step 3: Internet WAN

Now, just under the internet WAN, choose “Connection type” and tap “NEXT” button. A screen will come up and users need to enter IP address provided by ISP. Click “apply changes”  and after sometime, the router will modify it into connected status

Step 4: Configure  your DNS

As per as Belkin router support service technicians, just UN-tick “Automatic from ISP” option and enter DNS IP Addresses properly and apply it.

Step 5: Configure your wireless settings

Enter your SSID, Protected Mode into an Enable protection

Step 6: Configure your wireless security

Here you will come up with four protocols from which you can choose to configure.

Here the option of guests internet is allowed.

Step 7: Configuring LAN settings.

In this section users can decide to modify the LAN IP from the default mode to another one

Step 8: Configuring the Belkin router password now

Here the first thing is to set a password in the wireless router which will help users avoid all security issues. Now, enter a strong password and click Apply.

Call us for more such Belkin router queries and get world-class solutions at your desk!


We are a group of expert technicians available at Dial 18003358177 Belkin router support number 24/7 hours to bring future effective solutions at their desk. Technicians do study every issue from the core which helps them resolve the matter with world-class solutions at your desk.

Belkin Router

How To Update The Belkin Router Firmware?

A firmware update comes up with instructions to help users enhance its performance. Here the blog will teach you how to update the Belkin router’s firmware in simple steps. Well, here we will discuss the method based on web page set-up mode but before we start this, do ensure that the computer has strong connection to the router via Ethernet cable. Let us see what steps are there to go ahead with the process and update the above.

Steps to update the Belkin router’s firmware are

Update The Belkin Router Firmware

Step 1: Check for its version

The first step to update the Belkin router’s firmware is check whether it is working on the latest version or not?

Step 2: Download the firmware

Before we update the firmware, simply have a check on its version and save the updated firmware file to your computer.  If you encounter issues during this step then, clear the cache of your browser. Now, start to upgrade it through a web-based setup page mode:

  • The first step here is to access your web-based setup page and this is done by just opening any of your web browser.  Navigate to the address bar and enter the router’s local IP address.
  • As per as Belkin router support service technical team, try to login at the top-right corner of your page.
  • Enter the router’s Password or if you do not have, leave this field blank. Tap “Submit” icon. Go to the “Utilities” section which is there in the left navigation panel to click on “Firmware Update”.
  • Tap “ browser” icon and search for the file that you have saved earlier
  • Select the firmware file and tap “Open” icon to choose “Update”
  • Users now will come across a prompt message and they need to continue with the upgrade process.  Click OK. This prompt message will advise users not to turn off until upgrade message will appear.  Click OK. It will then update the firmware
  • Users will come across a message of several seconds and here they have to click on “OK” button.

For more such issues, connect with our technical experts and experience expert guidelines!

Belkin Customer Support number

We are a team of expert technicians who are available 24/7 hours at Dial 18003358177 Belkin router support number to provide complete assistance to users as and when in need. Technicians possess in-depth knowledge of every minute to minute issue which helps them resolve related router faults at a go. Call us anytime and get appropriate remedies at your desk!

Belkin Router

How To Fix Belkin Router Internet Connection Issue?

There are instances where users will come across unexpected problem with Belkin routers and it may result in internet connection problem. The problem can arise due to lost internet issue, problems in weird internet connection or in wired computers. Fix Belkin router internet connection issue with apt guidelines. Apply some solutions discussed below

Solutions to fix Belkin Router internet connection issue are

Fix Belkin Router Internet Connection Issue

Solution 1: improve lost internet connection of wired and wireless computers

To fix Belkin Router internet connection issue, just unplug the modem, router and the computer from power outlets. Wait for at-least 30 seconds before plugging them back into it.  Re-plug your modem first which is followed by router and computers.  Wait for the lights to stabilize and check for online status.

Related Blog :How To Fix Belkin Router Dropping Connection Error?
Solution 2:  Resolve wired computers do not have internet connection

Check for issue in the physical connections, cables as well as lights on your router. Ensure that lights corresponding to the router’s port has a proper connection to computer. Check whether cables are properly plugged in. Now, check whether the device has a valid IP address from the router.

Solution 3:  Check for connections of wireless computers
As per as Belkin router support service technicians, have a check on below factors such as:
  • Network selection and security
  • Client TCP/IP settings
  • Signal strength
  • Sources of interference
Solution 4:  Check whether you are able to connect to the Wi-Fi

Check whether the wireless settings of routers are well connecting to the computer or device to the network. Check for correct Wi-Fi name, SSID or the password.  Once done, check whether you have correct wireless settings or not? Connect to the computer or device to the network.

For more issue, connect with our technical team and experience world-class solutions at your desk!

Belkin Customer Support number

We are a group technical experts available at Dial +1-800-889-4715 Belkin router support number 24/7 hours to bring future effective solutions at your desk. Technicians study every minute to minute issue from the core and this always enable us to convey appropriate remedies. Call us anytime and experience solutions like never before.

belkin router

How To Recover Belkin Router Lost Password Issue?

Belkin offers you a sophisticated wireless router. Belkin Routers are the most preferred router in terms of performance and network coverage. To prevent your network from fraudulent usages, you need to set a password for your router. But in most of the cases, managing the password becomes the most hectic part. By and large, resetting the Lost Belkin Password has become the most commonly raised queries.

So, here we would be addressing this issue, with the proper reasoning and also potential solutions to resolve the issue on your own.

So, did you just forgot the Belkin Router password or you have lost it. Here we will teach users how to Recover Belkin Router Lost Password Issue in few simple steps.  May be there is a need to connect with the new device if you have forgotten the Belkin router password.

Let’s Have a look on Lost Belkin Password

Although, Belkin is known for its well-known for its product, yet it has some flaws too. Among them signing issue is one that got the pick in the list. Even after trying many times unable to get the access. There could be a number of existing reasons for this issue.

The most prominent reason could be mismatched registered ID. After a few wrong attempts, the window might show a warning regarding Router User Account. Due to an authentication problem, your account might be suspended for a few days.

Following simple steps should resolve the issue, however, for an instant relief you can directly get in touch with us.

Steps to Recover Belkin Router Lost Password Issue are as follows:

Recover Belkin Router Lost Password Issue

Step 1: To recover the Belkin Router lost password issue, open up the browser and type “” Click “Enter” to follow.

Step 2: Now tap on “Login” icon and click “submit” icon without typing any password. Because it is possible that most of the time, you do not have any password.

Step 3: Navigate to the “Wireless” which is there at the left hand side. Now, click on “Security” icon where users will come across with Belkin Password.

Step 4: Pre-shared Key here will be your current password for your Belkin router device. Uncheck the Obscure Psk and check for the Belkin router password

Step 5: Press the “Reset Key” which is there at the back of the Belkin Router. Hold it for 30 Sec to let it go.

Step 6: Restart the Belkin Router to reconfigure each of the settings. While users are configuring the Belkin Router they can now easily set-up Belkin router admin password as well as its wireless Password.

Another Way to Recover Belkin Router Lost Password Issue

These are the solutions you can try to recover Lost Belkin Password. Closely following the steps should resolve the issue in the first instance.

Solution 1:

Router Password Modification

First, type in the default IP address ( in your browser’s address bar. You will be directed to the Router homepage.

Now, in the login window, enter the username and leave the password field blank. Now, Click on Submit Button. It will open the link to reset the password.

Then, put a strong Password into a New password Field and give the same in the Confirm Password Text box. Finally, click on Apply Changes Button. You will show a message like change your Password Successfully.

Now, try login again with your New Password and check whether you can resolve  Lost Belkin Password Issue or not.

Solution 2:

  • Turn on the Router Power button. Now, find out the Reset Button on your Router Device (The Reset Button position may vary according to the model number).
  • Then, press and hold the Reset Button for 15-30 seconds. It will boot your router automatically.
  • Then, Open a Default Router web page and leave password Field and click on Submit Button for resetting your Password.
  • Finally, follow the previous steps mentioned above.

If you are still struggling with Belkin Password Issue, connect with us for fast fixing.

Related blog: How To Reset and Update Belkin Router Administrator Password?

For more such issues, connect with our team and get world-class solutions at your desk!


We solve more such above issues by allowing users to reach us at +1-800-889-4715 Belkin Router Support Number which is available 24/7 hours at their desk.  Each and every issue of customers are studied to bring them the most effective solutions at their desk. Call us and get adept remedies at your desk.

We have certified engineers and technicians on our team capable o solving any issues you may ever face. So, recover Lost Belkin Password, with us the time you face a problem. Moreover, we aim to provide a long-term solution with utmost customer satisfaction. Therefore, Our Belkin Tech Support Team respond back to you as quickly as possible.

Now, our live chat is also available for you. Share your Router Issue and get the solution right in your chat box.